How To Change 2006 Honda Cr V Thermostat

How to Replace the Thermostat on a Honda CRV

by Lisa Wampler

radiator sense of humor image by John Sfondilias from Fotolia.com

When the thermostat goes bad in a Honda CRV, you risk causing serious harm to the engine if you do non supplant it. Replacing the thermostat is much cheaper and easier and so replacing or rebuilding an engine that has been damaged from an inoperable cooling organization. If yous've ever been interested in knowing what keeps your CRV engine running in top shape, the job of replacing a thermostat is a skillful way to get started.

Stride i

Locate the thermostat housing comprehend by tracing the radiator embrace, which extends from the meridian of the radiator to the right side of the engine. The CRV engine is installed sideways, so the right side faces the radiator. The thermostat housing is coupled with the radiator hose.

Step 2

Remove the bolts from the thermostat housing cover with a x mm wrench. Pull the thermostat housing upwards and away from the base of the engine. Exit it connected to the radiator hose, just button it off to the side so you can access the thermostat.

Step 3

Pull the thermostat out of the engine. It's non bolted into place, and then it can be pulled correct out. Locate the thermostat housing gasket on the base of the engine. Pull it off, and throw it away.

Step 4

Place a new gasket in place, and set up the thermostat back into the CRV engine. Be conscientious non to get the gasket wet--that could cause a leak.

Place the thermostat housing cover back onto the engine, and bolt information technology into identify. Warm the engine upwardly, then check for whatsoever leaks. If there is a leak, tighten the cover downwardly more. This should eliminate any leaking.

References

Things You'll Need

Warnings